Visible light excitation of CdSe nanocrystals triggers the release of coumarin from cinnamate surface ligands

The photochemical properties of organic ligands on the surface of nanocrystalline CdSe particles were examined. A number of thiols carrying a substituted cinnamate tail was synthesized. In solution, these cinnamate compounds undergo light-induced (374 nm) E-Z isomerization, followed by a nonphotolytic lactonization to give highly fluorescent coumarin. The cinnamate-thiols were successfully exchanged onto the CdSe nanocrystal, and the photochemical behavior of these conjugates was studied. Upon aerobic photolysis at 374 nm, the surface cinnamates released coumarin accompanied by rapid nanocrystal degradation. This degradation was not observed under similar anaerobic conditions or when the organic ligands did not contain the cinnamate group. Surprisingly, very similar results were obtained upon irradiation at visible wavelengths at which the cinnamate has no absorption. With the aid of UV-visible absorption spectroscopy, fluorescence spectroscopy, and electrochemistry, a unified theory for both the increased photoinstability of the nanocrystal as well as the coumarin release was proposed. It involves cinnamate radical anions on the CdSe surface, formed upon electron transfer from the excited nanocrystal to the surface cinnamate, undergoing E-Z isomerization. Practically, this results in the remarkable ability to release coumarin from nanocrystal ligands simply by exciting the nanocrystal with visible light. This new photorelease protocol not only aids in the understanding of fundamental nanocrystal-ligand interactions but may also offer new opportunities in the areas of drug delivery and imaging.     

Hyperfine spectrum of RbCl

The molecular beam electric resonance technique has been used to conduct a high precision examination of the hyperfine spectrum of the four isotopomers of RbCl. Coupling constants for the nuclear electric quadrupole interactions, the spin-rotation interactions, the tensor and scalar spin-spin interactions, and a rubidium nuclear octupole interaction, and their dependence on vibrational and rotational states have been determined. The dominant interaction, the rubidium nuclear electric quadrupole interaction, shows a small shift with substitution of the chlorine isotope.     

Community structure in the United Nations General Assembly

We study the community structure of networks representing voting on resolutions in the United Nations General Assembly. We construct networks from the voting records of the separate annual sessions between 1946 and 2008 in three different ways: (1) by considering voting similarities as weighted unipartite networks; (2) by considering voting similarities as weighted, signed unipartite networks; and (3) by examining signed bipartite networks in which countries are connected to resolutions. For each formulation, we detect communities by optimizing network modularity using an appropriate null model. We compare and contrast the results that we obtain for these three different network representations. We thereby illustrate the need to consider multiple resolution parameters and explore the effectiveness of each network representation for identifying voting groups amidst the large amount of agreement typical in General Assembly votes.     

Enhancement of second harmonic generation efficiency: Cs(I)-doped tris(thiourea)zinc(II) sulphate crystals

The effect of dopant cesium (Cs(I)) over a concentration range from 1 to 10 mol% on the growth process, morphology, thermal and optical properties of tri(thiourea)zinc(II) sulfate (ZTS) single crystals grown by slow evaporation solution growth technique has been investigated. Incorporation of Cs(I) into the crystal lattice was well confirmed by energy dispersive X-ray spectroscopy (EDS). The lattice parameters of the as-grown crystals were obtained by single crystal X-ray diffraction analysis. The reduction in the intensities observed in powder X-ray diffraction patterns of doped specimen and slight shifts in vibrational frequencies in fourier transform infrared spectra (FT-IR) indicate the lattice stress as a result of doping. Thermal studies reveal the purity of the material and no decomposition is observed up to the melting point. High transmittance is observed in the visible region and the cut-off λ is ～280 nm. The surface morphology of the as-grown specimens was studied by scanning electron microscopy (SEM). The second harmonic generation (SHG) efficiency of the host crystal is enhanced greatly in the presence of high concentrations of the dopant.     

Mechanistic insights into the hydrolysis of organophosphorus compounds by paraoxonase‐1: exploring the limits of substrate tolerance in a promiscuous enzyme

We designed, synthesized, and screened a library of analogs of the organophosphate pesticide metabolite paraoxon against a recombinant variant of human serum paraoxonase‐1. Alterations of both the aryloxy leaving group and the retained alkyl chains of paraoxon analogs resulted in substantial changes to binding and hydrolysis, as measured directly by spectrophotometric methods or in competition experiments with paraoxon. Increases or decreases in the steric bulk of the retained groups generally reduced the rate of hydrolysis, while modifications of the leaving group modulated both binding and turnover. Studies on the hydrolysis of phosphoryl azide analogs as well as amino‐modified paraoxon analogs, the former being developed as photoaffinity labels, found enhanced tolerance of structural modifications when compared with O‐alkyl‐substituted molecules. Results from computational modeling predict a predominant active site binding mode for these molecules, which is consistent with several proposed catalytic mechanisms in the literature and from which a molecular‐level explanation of the experimental trends is attempted. Overall, the results of this study suggest that while paraoxonase‐1 is a promiscuous enzyme, there are substantial constraints in the active site pocket, which may relate to both the leaving group and the retained portion of paraoxon analogs. Copyright © 2012 John Wiley & Sons, Ltd.     

Quantum hysteresis loops in microscopic system: The loop area as a dynamical parameter

The area enclosed by hysteresis loops in a periodically forced bistable microscopic system at zero-temperature is examined by using the time dependent Hellmann-Feynman theorem and the Fourier grid Hamiltonian recipe for solving time-dependent Schrödinger equation. Effects of non-zero temperatures are explored with reference to a symmetric double well potential. The barrier crossing or, relaxation rates are shown to correlate systematically with the area of the loop. The possible use of hysteresis loop area in designing field parameters for optimal control is suggested.     

Melt drawing of ultra‐high molecular weight polyethylene: Comparison of Ziegler‐ and metallocene‐catalyzed reactor powders

The drawing behavior of the ultra‐high molecular weight polyethylene (UHMW‐PE) melts has been studied by comparing the stress/strain curves for two types of samples as polymerized using conventional Ziegler and newer metallocene catalyst systems. Two UHMW‐PE samples, having the same viscosity average molecular weight of 3.3 × 10⁶, but different molecular weight distribution, have been drawn from melt at special conditions. The sample films for drawing were prepared by compression molding of reactor powders at 180°C in the melt. Differences in the structural changes during drawing and resultant properties, ascribable to their broad or narrow molecular weight distribution, were estimated from tensile tests, SEM observations, X‐ray measurements and thermal analyses. The metallocene‐catalyzed sample having narrower molecular weight distribution, could be effectively drawn from the melt up to a maximum draw ratio (DR) of 20, significantly lower than that obtained for the Ziegler‐catalyzed sample, ∼ 50. The stress/strain curves on drawing were remarkably influenced by draw conditions, including draw temperature and rate. However, the most effective draw for both was achieved at 150°C and a strain rate of 5 min⁻¹, independent of sample molecular weight distribution. The efficiency of drawing, as evaluated by the resultant tensile properties as a function of DR, was higher for the metallocene‐catalyzed sample having narrower molecular weight distribution. Nevertheless, the maximum achieved tensile modulus and strength for the Ziegler sample, 50–55 and 0.90 GPa, respectively, were significantly higher than those for the metallocene sample, 20 and 0.65 GPa, respectively, reflecting the markedly higher drawability for the former than the latter. The stress/strain behavior indicated that the origin of differences during drawing from the melt could be attributed to the ease of chain relaxation for the lower molecular weight chains in the melt. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1921–1930, 1999     

Uniaxial drawing of polytetrafluoroethylene virgin powder by extrusion plus cold tensile draw

Polytetrafluoroethylene (PTFE) virgin powder was ultradrawn uniaxially by a two-stage draw. A film, compression molded from powder below the melting temperature (T_m), was initially solid-state coextruded to an extrudate draw ratio (EDR) of 6–20 at an established optimum extrusion temperature of 325°C, near the T_m of 335°C. These extrudates from first draw were found to exhibit the highest ductility at 45–100°C for the second-stage tensile draw, depending on the initial EDR and draw rate. The maximum achievable total draw ratio (DR_{t, max}) was 36–48. Such high ductility of PTFE, far below the T_g (125°C) and T_m, is in sharp contrast to other crystalline polymers that generally exhibit the highest ductility above their T_g and near T_m. The unusual draw characteristics of PTFE was ascribed to the existence of the reversible crystal/crystal transitions around room temperature and the low intermolecular force of this polymer, which leads to a rapid decrease in tensile strength with temperature. The structure and tensile properties of drawn products were sensitive to the initial EDR, although this had no significant influence on DR_t,max. The most efficient and highest draw was achieved by the second-stage tensile draw of an extrudate with the highest EDR 20 at 100°C, as evaluated by the morphological and tensile properties as a function of DR_t. The efficiency of draw for the cold tensile draw at 100°C was a little lower than that for solid-state coextrusion near the T_m. However, significantly higher tensile modulus and strength along the fiber axis at 24°C of 60 ± 2 GPa and 380 ± 20 MPa, respectively, were achieved by the two-stage draw, because the DR_t,max was remarkably higher for this technique than for solid-state coextrusion (DR_t,max = 48 vs. 25). The increase in the crystallite size along the fiber axis (D₀₀₁₅), determined by X-ray diffraction, is found to be a useful measure for the development of the morphological continuity along the fiber axis of drawn products.© 1998 John Wiley & Sons, Inc. J. Polym. Sci. B Polym. Phys. 36: 2551–2562, 1998